Feature Request: Surface Hatches - vaSection style

August 20, 2019, 8:49 pm

≫ Next: BUG: Artifact when toggling Cut Plane in Levels

≪ Previous: Curtain Walls - material assignment vray

$

0

0

@Patt wrote:

It would be fantastic if VisualARQ added the ability to dynamically hatch surfaces, to be shown in ‘Hidden’ display mode the way it currently does with sections.

That would allow a Revit-like easy creation of drawings that could be printed in vector with an indication of materials/surfaces.

My current workaround is to add hatches/fills as separate objects using grasshopper but it would be amazing if ‘surface hatch’ was a property in the “section attributes” tab (even though strictly speaking, this would work with or without a section).

Ideally, there would also be a switch to turn this feature on and off, the same way you can turn on an off the line thickness display.

Does anyone else have some good workarounds for this?

image.png1919×1040 218 KB

Posts: 4

Participants: 2

Read full topic

---

BUG: Artifact when toggling Cut Plane in Levels

August 21, 2019, 9:21 pm

≫ Next: Openings from curves on curving walls

≪ Previous: Feature Request: Surface Hatches - vaSection style

$

0

0

@dannysquires wrote:

I have a door component linked and embedded as a block. I’ve managed to isolate this bug from the main file where hundreds of component blocks are arrayed and reproduce it in a new file (attached).

the block is mirrored around x-axis and creates an artifact cut through centred along the y-axis when the level cut plane is toggled on.

VA-bug_dor-artifact.3dm (3.1 MB)

VA-bug_dor-artifact.png2534×1777 556 KB

Posts: 3

Participants: 3

Read full topic

Openings from curves on curving walls

August 22, 2019, 5:24 pm

≫ Next: There is a problem scaling

≪ Previous: BUG: Artifact when toggling Cut Plane in Levels

$

0

0

@djhg wrote:

I need to put a porthole type opening in a vaWall which curves (in top view only, the wall plane is vertical.)

Posts: 3

Participants: 2

Read full topic

There is a problem scaling

August 23, 2019, 12:32 am

≫ Next: VisualArq install error

≪ Previous: Openings from curves on curving walls

$

0

0

@mehran09197306634me wrote:

HI

When we want to scale a target in visual arq, it only applies to walls, for example we want to compare it to 1/200, it’s just the length and width of the wall.

Capture.JPG1267×736 68.9 KB

Posts: 2

Participants: 1

Read full topic

VisualArq install error

August 26, 2019, 2:29 am

≫ Next: Editing Stairs

≪ Previous: There is a problem scaling

$

0

0

@Holo wrote:

Hi guys, I have problems installing the lastet version 2:

It installs just fine but upon launching Rhino I get this error:

image.png1418×1068 79.4 KB

Any idea on what I can try?

Posts: 3

Participants: 2

Read full topic

Editing Stairs

August 26, 2019, 3:39 am

≫ Next: CM style in VisualARQ

≪ Previous: VisualArq install error

$

0

0

@Eugen wrote:

Hello!
It does not seem to be possible to add or delete Stair control points. Is that correct, or is there a special workflow?
Thanks!
Best regards
Eugen

Posts: 3

Participants: 2

Read full topic

CM style in VisualARQ

August 27, 2019, 3:46 am

≫ Next: Add tag in Grasshopper object

≪ Previous: Editing Stairs

$

0

0

@simon12 wrote:

Hi,
We use in our country often the cm style. Is there a possibility to create and/or export of a CM style?
Regards, Simon

Posts: 5

Participants: 2

Read full topic

Add tag in Grasshopper object

August 27, 2019, 5:09 am

≫ Next: Tag Object Orientation Problem

≪ Previous: CM style in VisualARQ

$

0

0

@simon12 wrote:

Is it possible to add a tag to an object in Grasshopper?
Best Regards, Simon

Posts: 2

Participants: 2

Read full topic

---

Tag Object Orientation Problem

August 28, 2019, 1:36 am

≫ Next: Functions in Table

≪ Previous: Add tag in Grasshopper object

$

0

0

@ahmet.unveren wrote:

Hello,

I wonder if this is a bug?

Rhino_FSA4DLCTmh.png1357×713 32.5 KB

Posts: 2

Participants: 2

Read full topic

Functions in Table

August 28, 2019, 12:07 pm

≫ Next: Space Tagger - Tagging a furniture with the space name

≪ Previous: Tag Object Orientation Problem

$

0

0

@ahmet.unveren wrote:

Hello,
Basic table functions would be very appreciated.
ie:
Unit Cost, Quantity, Sub Total and Total Cost
is a standard need of format.

Posts: 1

Participants: 1

Read full topic

Space Tagger - Tagging a furniture with the space name

August 28, 2019, 12:12 pm

≫ Next: Change Multiple Blocks To Furnitures

≪ Previous: Functions in Table

$

0

0

@ahmet.unveren wrote:

I wonder if there is a ‘proper’ way of doing this but here is the script that I write for this purpose.

vaSpaceTagger.py (2.9 KB)

Posts: 1

Participants: 1

Read full topic

Change Multiple Blocks To Furnitures

August 28, 2019, 12:38 pm

≫ Next: VaSection display slows project down

≪ Previous: Space Tagger - Tagging a furniture with the space name

$

0

0

@ahmet.unveren wrote:

Hello:

Here is the script to change multiple blocks to furnitures.
It first creates the furniture style with the same name of the block then creates the furniture instance.

vaChangeBlocksToFurniture.py (921 Bytes)

Posts: 1

Participants: 1

Read full topic

VaSection display slows project down

September 2, 2019, 9:44 pm

≫ Next: API - Set Parameter Value

≪ Previous: Change Multiple Blocks To Furnitures

$

0

0

@djhg wrote:

I find that if I activate a section to display in a particular window or detail view, rhino slows noticeably. A few section views on a layout and it’s too slow to work. Clipping planes do not have this acute effect.

Is this normal?

Posts: 2

Participants: 2

Read full topic

API - Set Parameter Value

September 4, 2019, 5:34 am

≫ Next: Set ref point for level

≪ Previous: VaSection display slows project down

$

0

0

@ahmet.unveren wrote:

Hello,

I need to set a paramater value of a Style.
va.SetParameterValue sets the ‘Object Paramater’ not the ‘Style Parameter’
Is ‘va.SetParameterValueSource’ what I need?
If so, I couldn’t figure out what ‘ValueSource’ means in the function.

Thanks in advance.

Posts: 2

Participants: 2

Read full topic

Set ref point for level

September 5, 2019, 8:19 am

≫ Next: Objects don't display properly as linked blocks

≪ Previous: API - Set Parameter Value

$

0

0

@simon12 wrote:

Hi,
We have a problem. Our drawing is in meters and the object we draw is at xxx m. But VA create the 1st level at around 50 or 60 km. Is there a posibility to change the reference height for the levels?
Regards, Simon

image.png1920×1040 69.3 KB

Posts: 2

Participants: 2

Read full topic

---

Objects don't display properly as linked blocks

September 8, 2019, 5:57 pm

≫ Next: Promblems with split command

≪ Previous: Set ref point for level

$

0

0

@djhg wrote:

Here is a collection of objects set to display a certain way in section - using Va’s section attributes tool in hidden mode.

If the objects are turned into a linked block, when it’s inserted its display doesn’t respect those settings. The file used as the linked block is attached below.

This is a big problem for me.

ON the left, the inserted block. On the right, the same objects imported. The Block display doesn’t respect it’s own object’s settings. Changing the section attribute settings of the block has no effect.

ObjectDisplaysDifferentlyWhenInsertedThanImported.jpg769×973 144 KB

Vestibule.3dm (2.0 MB)

Posts: 2

Participants: 2

Read full topic

Promblems with split command

September 11, 2019, 7:04 pm

≫ Next: Orient spaces text to Cplaine

≪ Previous: Objects don't display properly as linked blocks

$

0

0

@jon-vrin wrote:

prob.3dm (174.5 KB)

When i use split command in the middle of the wall , one of the windows Disappears

Posts: 2

Participants: 2

Read full topic

Orient spaces text to Cplaine

September 13, 2019, 6:21 am

≫ Next: Can't change text style for space text

≪ Previous: Promblems with split command

$

0

0

@simon12 wrote:

Hi,
is it possible to orient the text of the spaces to a Cplaine?
Best regards, Simon

Posts: 1

Participants: 1

Read full topic

Can't change text style for space text

September 13, 2019, 6:30 am

≫ Next: Assigning textures to solids added to a wall

≪ Previous: Orient spaces text to Cplaine

$

0

0

@simon12 wrote:

Hi,
when I try to change the text style of my space text, VA change to another style.
Here I select the Book-style:

And then I get the Black-style:

image.png782×577 14.2 KB

Best regards, Simon

Posts: 1

Participants: 1

Read full topic

Assigning textures to solids added to a wall

September 14, 2019, 8:57 pm

≫ Next: Grasshopper - VA elements adjacency

≪ Previous: Can't change text style for space text

$

0

0

@djhg wrote:

Can this be done once the solid is added to a wall?

Posts: 1

Participants: 1

Read full topic